Lissafin Magana na 1
|
A'a |
Suna |
Misali |
Farashin raka'a (US $) |
Yawan (Saita) |
Adadin (US $) |
Motorarfin Mota (KW) |
||
| Dukan aikin taya: cire baƙin ƙarfe daga taya, sai a sami robar <50x50mm | ||||||||
| 01 | Single ƙugiya Debeader |
LSJ-1300 |
|
1 |
|
15 |
||
| 02 | Dukan Yanke Taya |
QDJ-1300 |
|
1 |
|
7.5 |
||
| 03 | Dukan Taya Shredder(tare da mai jigilar abinci) |
ZPS-900 |
|
1 |
|
30 × 2 + 1.1 + 2.2 = 63.3 | ||
| Roba granule sarrafawa: Murkushe abin da ke sama zuwa cikin Roba 2-5mm granules, a lokaci guda, raba waya na karfe | ||||||||
| 04 | Rubber Cracker Mill |
XKP-710 |
|
1 |
|
250 |
||
| 05
|
Mataimakin Kayan aiki |
Babban Faɗakarwar allo |
MVS-11 |
1 |
|
11 |
26.5 |
|
|
Allon Faɗakarwar karin haske |
AVS-4 |
4 |
||||||
|
5 Roll Magnetic SEPARATOR |
RMS-1.5 |
1.5 |
||||||
|
Sanya ruwa mai sanyaya ruwa |
RPF-3 |
3 |
||||||
|
Arsarfin Rubber Powder Return Belt |
PRB-1.5 |
1.5 |
||||||
|
PVC anti-ƙulla karfe waya na'ura mai bel |
WCB-4 |
4 |
||||||
|
Assemblyungiyar gaba da ta ɗagawa na gantry frame |
AGF-1 |
|
||||||
|
2-mirgine magnetic SEPARATOR |
RMS-2 |
1.5 |
||||||
| Jimla |
5 |
362.3KW |
||||||
| Lura:1. Wadannan duk farashin inji sune bisa FOB Qingdao. | ||||||||
No2 Sharuddan Kasuwanci
| Sharuɗɗan biya | 1. 30% T / T na jimlar ƙimar kwangilar da za'a biya a gaba.
2. Ragowar kashi 70% wanda za'a biya lokacin da dukkan injina suka shirya domin isarwa. |
| Tushen wutan lantarki | Kamar yadda bukatun mai siye (ya kamata a tabbatar a cikin kwangilar) |
| Sharuddan Isarwa | Lokacin Isarwa: kwanaki 60 bayan karɓar 30% akan ƙasa |
| Idan an buƙata, mai siyarwa zai tsara ƙwararrun ƙwararrun masarufi 1 ~ 2 don jagorantar shigarwa da lalata na'urorin a tsiren mai siye, tafiye-tafiyen biza da tikiti, farashin otal, abinci shine farashin mai siye. Za'a tattauna ainihin farashin akan ƙarin. | |
| Garanti | Watanni 18 tun da aikin yau da kullun a cikin masana'antar masu siye. |
| Ingancin
Maganar |
30 kwanakin tun kwanan wata tayin |
.3 No.3 Janar Gabatarwa Ga Kowane Na'ura
1.Single ƙugiya Debeader LSJ-1300
Yi amfani da: Fitar da madafan waya daga bakin taya ta sharar gida.
Tsarin fasali:
The ruwa na abun yanka ne Ya sanya daga gami waldi da kuma surface ne da wuya lalacewa-juriya.
A kan batun aminci, wannan injin yana da tsari mai kariya, wanda zai iya ba da tabbacin aminci yayin aiwatar da cire madaurin waya.
Mota da mai ragewa, kuma gabaɗaya, tsarin yana da ƙarami.
Injin ya mamaye dukkan falon, shigarwar da ta dace.
Sigogi na fasaha:
| Misali | LSJ-1300 |
| Ja da karfi | 5T |
| Motar Mota | 15KW |
| Max. Yankin Taya | 1300mm |
| Gabaɗaya Girma (L × W × H) | 1900 × 1055 × 1355 (mm) |
| Nauyi | 2.5T |
Tunanin Hoto 
(wayoyi a bakin taya) |
 |
2. Duka Mai Taya QDJ-1300
Yi amfani da:
Yanke bulolin tayoyin sharar gida zuwa sassa da yawa kuma zasu zama mafi dacewa ga yankakken mashin taya.
Injin yankan taya yana dauke da inji, injin lantarki, silinda mai, ruwa daya, firam da juyawa da dai sauransu.
Sigogin fasaha
| Daidaita taya | ≦ 1300mm |
| Motar wuta | 7.5kw |
| Girma (L × W × H) | 2080 × 1000 × 2130 (mm) |
| Nauyi | 1.8T |
Tunanin Hoto 
(tayoyin da aka yanyanka)
|
 |
3. Dukan Taya Shredder ZPS-900
Yi amfani da:
A zazzabi na gaba ɗaya, ana iya ragargaza manyan taya a kai tsaye zuwa bulo na taya 50 * 50mm.
Sigogi na fasaha:
| Misali | ZPS-900 |
| Girman Input | ≤ 900mm |
| Girman fitarwa | 50 × 50mm |
| Motar Mota | 30 × 2KW (2 motar motsa jiki) |
| .Arfi | 1.5-2Ton / H |
| Mai Kulawa da Powerananan Conarfin veauki | 1.1KW |
| Babban vearfin Conauki | 3KW |
| Babban Shaft Speed | 19RPM |
| Gudun allo | 4RPM |
| Adadin ruwan wukake | 18pieces (wanda aka yi da gami da walƙiyar ƙarfe, |
| Nauyi | 6T |
| Girma (L × W × H) | 3450 × 2100 × 2400 (mm) |
 (sandunan roba a cikin 50 × 50mm) |
 |
4. Rubber Cracker Mill XKP-710
Yi amfani da: Ana amfani dashi galibi don murƙushe manyan tubalan roba zuwa ƙwanan roba na 2-5mm.
Fasalin Tsarin:
An tsara murhunan mu na mutunci tare da dandamali masu kyau na aiki; duk wayoyi za a hade su da kyau daga sarrafa tsarin zuwa mota.
Lokacin amfani da injin, abokan cinikin kawai suna buƙatar haɗi kai tsaye zuwa wuta.
Sigogi na fasaha:
| Misali | XKP-710 |
| Groove roller: Aikin yi zagaye na diamita X Tsawan aikin yi | 710mm x 1100mm |
| Smooth nadi: Aikin yi zagaye na diamita X Aikin yi tsawon | 610mm x 1100mm |
| Arirgar Saurin Groove Roller | 70.06m / min |
| Rotary Speed na Groove Roller | 31.42r / min |
| .Arfi | 3.5t / h (na 2-5mm) |
| Arfi | 250kw |
| Girma (LxWxH) | 6200mmx2260mmx1700mm |
| Daidaitacce Roller Space | 0.1mm - 20mm |
| Yanayin Sanyawa | Juyawa hadin gwiwa, sanyaya ruwa |
| Abubuwan andauki da Maɗaukaki | Cast Karfe |
| Nauyi | Appr. 30ton |
Tunanin Hoto 
(murƙushin roba) |
 |
5. Rubber Cracker Mill Kayan Aiki
Aiki: Ware waya, Nunawa da ƙananan ƙwayoyin roba
1) Babban Faɗakarwar Allon: Tsawon 8m, Nisa 1.15m. Bakin karfe allo.
2) Allo Faɗakarwar Allon: Tsawon 4m, Nisa 1m.
3) 5 Roll Magnetic SEPARATOR: Ikon 1.5kw
4) Mai sanyaya mai sanyaya ruwa: Tsawon 3m
5) Returnarfin Rubutun arsarfin Maɗaukaki: Tsawon 2m
6) PVC mai ɗaure bel na waya mai ɗaukar bel: Tsawon 8.5m, Nisa 0.8m.
7) Gaban gaba da na baya dagawa taron na gantry frame: Dunƙule sanda hoisting 1 sa
8) 2-yi magnetic SEPARATOR: Fasaha bayani dalla-dalla na vulcanized roba foda da karfe abun ciki kasa da ko daidai da GBT 19208-2008
 |
(Wareran ƙananan wayoyin ƙarfe daga ƙwayoyin roba)
|
 |
|
