Features Kayan Kayan aiki
1. Kayan aikin yana tare da tsari mai kyau na sarrafawa da kuma zana aikin injiniya babba, wanda yake da sauki don aiki da gudanar da tsayayye.
2.An shirya shi da ruwan sanyi da ruwan wukake da ke sabunta na'urar. Ana iya amfani da ruwan wukake tare da 80% ƙarin aiki endu rance.
3.The buffing ingancin za a iya tabbatar da mafi barga daidai da aiki da atomatik bel auna na'urar.
4.Casing kore ta fadada baki, domin tabbatar da kuzarin aiki na sake karanta tayoyin.
Buffing tashar bukatun
Configuration Shawarar sanyi / kayan aiki
1. Shaye da tsarin cire kura
2. Taper da allurar hanci-hanci (yanke igiyar da ke kwarara)
3. Alamar alama ta alli (alama a wurin da raunin, faɗin nisa, da sauransu)
4. Wakilin man shafawa na dabaran fadada (amfani a kai a kai)
5. Taya siga tebur (shigar PC tebur sanyi a gaba, kuma kira shi kai tsaye lokacin polishing)
6. Mai auna ma'auni mai tushe / zurfin zurfin mita / ma'aunin tef mai sassauci (ana iya amfani dashi don ganowa mai fasali)
7. RMA misali nika kaushin samfuri (da ake amfani dashi don yanke hukunci kan sanya kayan nika kayan niki)
8. Tabarau tare da kariya ta gefe
9.Safai masu aminci
Conditions Yanayin aiki
1.Yara matsa iska: 5 ~ 8kg / cm
2.Tire kumbura matsin lamba: 1.5kg / cm2.
Standard Buffing matsayin ingancin misali
0 (girmamawa). Sanya taya a sander sai a hura shi.
Don shigar da taya da kyau, gyara shi, ana ba da shawarar yin abubuwa masu zuwa,
Tabbatar an fadada bakin faɗaɗa yadda yakamata
Yayin cikowa, juya taya a hankali
1.bayan nika taya din, yakamata a kiyaye dusar nikakken tare da zanen roba 1.5 ~ 2.5mm.
2.Bayan nikawa, layin jikin taya a wuri ɗaya bazai wuce kashi 1% na yankin abrasion ɗin taya ba,
Outididdigar jimlar waje ba za ta fi 2% girma ba, zurfin layin mai laushi ba ya cutar layin masana'anta.
3. bayan an nika, ramuka na huda taya da sauran lahani na kowace taya bazai wuce 3 ba, kuma nisan dake tsakanin raunukan biyu bazai wuce 1/6 na kewayen tayar ba.
4. nika bukatun:
4.1 nika zurfin za a sarrafa a 1.5-2mm.Rough gama na goge surface: RMA 3 ~ 5.
4.2 nika karkatarwa karkacewa, taya kambin nika saman karkacewa ba ta fi 1MM ° ba
4.3 faɗin rawanin goge zai kasance daidai da ƙasa da inci 1/16 (2mm) na faɗin tushe, kuma matakan da aka yi amfani da shi zai kasance daidai da sigogin taya (radius ɗin niƙa na inji zai a saita daidai da sigogin taya).
5. Masunta:
- goge goge nisa na asali kamar yadda ya kamata
- lokacin da ya zama dole a gyara da nika kafadar tayar, juya mai nika zuwa 30 ~ 40 °, sannan a datse kafada biyu a kusurwa daidai, ta yadda nisan dake tsakanin tsakiyar rawanin taya da baki biyu daidai yake da har zuwa yiwu.
- DPC: Yi girman faɗi daidai da na takun.
- babu DPC:
Sake maimaita nauyi mai nauyi: sake fadada nisa daidai da fadin takaddama.
Reunƙarin gyaran haske: sanya faɗin maimaitawa ya yi ƙasa da ƙwanƙwasa ƙwanƙolin ƙwanƙwasa (ƙarancin 1.6mm a kowane gefen)
TRAC ring retread: sanya fadin miya kasa da nisa daga matattaran kafa (3.2mm kasa da kowane bangare)
- idan tafin kafadar tazarar kusurwa ta kusa da 13mm, sake karantawa tare da roba mai tazara.
◐ Safet
1.Fin buffing ， kawar da bayyane baƙon abu, gami da dutse, kusoshi, sukurori, da dai sauransu.
2.flatable bai fi 15 psi ba (1.5 Kg / cm2).
3. tabaran kariyar aiki
4. ba'a barin safofin hannu da sanya tufafi masu kyau
5.da tsawon gashi dole ne a daure shi
Da fatan za a koma zuwa kayan aikin nika na injin, fahimci duk wata matsalar tsaro.
Object Manufofin samarwa
1. Amintaccen samarwa;
2. daidaitaccen tsari, ingantaccen aiki, samar da kyawawan taya.
